Silk screen printing ribbon and heat transfer ribbon are two common logo making methods in production. What is the difference in practical use. Silk screen ribbon process and method: first select the ribbon you like, then pour ink on one end of the screen printing plate when printing, apply a certain pressure on the ink part of the screen printing plate with the scraping scraper, and move towards the other end of the screen printing plate at the same time. The ink is squeezed onto the substrate by the scraper from the mesh of the graphic part. In this way, the ink is attached to the fabric. Therefore, there will be a strong sense of ink, and large-area printing will make the webbing hard. This kind of webbing has the advantage of bright color. The logo is prominent. The disadvantage is that if the adhesion of the fabric is not strong, it is easy to fall off, especially when washing or scraping. Moreover, most of the webbing adopts manual silk screen printing. Overprint logo is easy to be inaccurate. The output is not high.
　　Strictly speaking, the heat transfer printing in the production of webbing should be called thermal sublimation, which is also the product of the post Olympic era. The principle of Olympic hanging rope webbing is to print it on the paper with special ink easy to sublimate, and then sublimate and transfer it to the fabric by heating. The sublimated ink will penetrate into the fabric. Therefore, the hanging rope made by heat transfer will not be decolorized. But its color is less obvious than silk screen printing. Because it is machine printed transfer paper, the hanging rope of thermal transfer is very accurate in multi-color case. There will be no adverse conditions such as deviation. In the case of a small amount of heat transfer webbing, there will be no price advantage because of the high cost of plate making. However, in mass production, due to machine printing, there will be a gap in price and production time.